Home
Services
Electrical Services for Home Owners
Electrical Services for Builders & Developers
Solar Panels
Solar Maintenance
About
Affiliates
News
Contact
0406 171 085
Facebook
Installation Details
Address of Installation
Postal Address
Suburb
State
QLD
NSW
VIC
TAS
NT
WA
SA
Postcode
PV module manufacturer and model number:
Number of modules in series in a string:
Number of strings in parallel in PV array:
Inverter manufacturer and model number:
Number of inverters
Number of MPPTs:
PV Array
PV Array Tilt
Array frame is certified to ASll 70.2 for installation location:
Please Select
Yes
No
No galvanically dissimilar metals are in contact with the array frames or supports:
Please Select
Yes
No
PV wiring losses are less than 3% at the maximum current output of the array:
Please Select
Yes
No
Wiring is protected from mechanical damage and is appropriately supported:
Please Select
Yes
No
PV Array Orientation
Array frame is installed to manufacturer's instructions:
Please Select
Yes
No
Roof penetrations are suitably sealed and weatherproofed:
Please Select
Yes
No
Where PV array comprises multiple strings protection has been provided:
Please Select
Yes
No
Weatherproof PV array isolator mounted adjacent to the array:
Please Select
Yes
No
LV DC and AC Installation
All low voltage wiring has been installed by a licensed electrical tradesperson:
Please Select
Yes
No
All wiring has been tested and approved by a qualified electrical tradesperson::
Please Select
Yes
No
Inverter
PV array isolator mounted adjacent to the Inverter:
Please Select
Yes
No
Lockable AC circuit breaker mounted within the switchboard to act as the Inverter main switch for the PV/Inverter system:
Please Select
Yes
No
Inverter is installed as per manufacturer's specification:
Please Select
Yes
No
Isolator Is mounted on output of the Inverter (where required):
Please Select
Yes
No
Inverter ceases supplying power within two seconds of a loss of AC mains:
Please Select
Yes
No
Inverter does not resume power supply until mains present for more than 60sec:
Please Select
Yes
No
Continuity Check
Circuit checked (record a description of the circuit checked In this column):
Please Select
Yes
No
Continuity of all string sub-array and array cables:
Please Select
Yes
No
Continuity of all earth connections (including module frame):
Please Select
Yes
No
System Check
Warning
- IF A STRING IS REVERSED AND CONNECTED TO OTHERS, FIRE MAY RESULT.
- IF POLARITY IS REVERSED AT THE INVERTER DAMAGE MAY OCCUR TO THE INVERTER
String 1:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
String 2:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
String 3:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
String 4:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
Sub-arrays where required:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
PV array at PV array switch-disconnector:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
Irradiance at time of recording the current:
Polarity
Please Select
Yes
No
Voltage
Short Circuit
Operating Current
Insulation Resistance Measurements
(see table 12.3.1 for min values pf insulation resistance)
Array positive to earth:
Array negative to earth:
Installer Information
I verify that the above system has been installed to all relevant standards
Installer Details
Full Name
Phone
Accreditation No.
Designer Details
Full Name
Phone
Accreditation No.
Electrician Details
Full Name
Phone
Accreditation No.
Signature of
Installer
Date
Signature of
Electrician
Date
Scroll to top